The difference between matrix led and led is that the number of lamp beads is different. 1. Ordinary LED headlights usually have two sets of lights, which will classify one set of LED lights as low beams and the other set as high beams; and matrix LED headlights have two sets of lights on the left a...
1. Building exterior lighting Projecting a certain area of the building is nothing more than the use of circular and square-shaped floodlights that control the beam angle, which is completely consistent with the concept of traditional floodlights. However, due to the small and thin LED light sourc...
Usually the human eye can perceive light flickering at frequencies up to 70 Hz, and above this frequency it is not. Therefore, in LED lighting applications, if the pulse signal has a low frequency component with a frequency lower than 70 Hz, the human eye will feel flickering. Of course, in a specif...
1. The LED brightness (MCD) is different and the price is different. The LEDs used for LED lamps should meet the laser class I standard. 2. LED with strong antistatic ability have long life and high price. Usually LEDs with anti-static greater than 700V can be used for LED lighting. 3. LED with the ...
Compared with ordinary fluorescent lamps, LED fluorescent lamps have the following advantages: 1. Energy saving. 2. Long life LED lights. 3. Good applicability, due to the small size of a single LED, it can be made into any shape. 4. The response time is short, which is the response ti...
Ordinary fluorescent lamp There is a filament at each end of the fluorescent lamp. The lamp tube is filled with a small amount of argon and thin mercury vapor. The inner wall of the lamp tube is coated with fluorescent powder. The gas between the two filaments emits ultraviolet rays when conducting ...